Wilson Electronics LLC 271265 사용자 설명서
3
Installing a Wilson Signal Booster
Select a location to install the signal booster that is away from excessive heat,
direct sunlight, moisture and that has proper ventilation. Do not place the signal
booster in an air-tight enclosure.
Recommended installation locations for in-building amplifiers are:
• On a wall
• In a closet
• Near a power outlet
Run the outside antenna cable to the signal booster and attach it to the connector
labeled “outside antenna” on the signal booster. Run the inside antenna cable to
the signal booster and attach it to the connector labeled “inside antenna” on the
signal booster.
Note: Be careful when plugging the connector in so as not to bend the center
pins on the connectors. Ensure cables have a tight connection.
AC/DC
Power Supply
Signal Booster
Cell
Site
Supports
Multiple
Users
Outside Antenna
Omni-Directional
Omni-Directional
Antenna Shown
Inside Antenna
Antenna Separation
Minimum separation distance
50 feet
Warning: See RF
safety warning on page 5.
Warning: Connecting the
signal booster directly to the cell
phone with use of an adapter will
damage the cell phone.
Note: Separation distance between inside and outside antennas must be a
minimum of 50 feet, 75 feet is even better.
GREEN:
RED:
RED: