Wilson Electronics LLC 2B1401SA 사용자 설명서

This guide will help you properly install Wilson’s direct connection amplifiers in both in-

vehicle and in-building applications. 

steps for your particular application prior to installing any equipment.  Read through 

the instructions, visualize where all the equipment will need to be installed and do a soft 

installation before mounting any equipment.  If you do not understand the instructions in 

full, seek professional help, or contact Wilson Technical Support at 866-294-1660.

•  Direct connection amplifier 

•  DC plug-in power supply with On/Off switch

•  6 ‘ extension cable

•  Outside antenna for in-vehicle or in-building use (required)

(NOTE: specifically tuned iDEN antennas available)

•  Cell phone-specific external antenna adapter (required)

•  AC/DC power supply (optional – for in-building use)

Wilson amplifiers are small, portable, bi-directional devices that deliver service levels 

consistent with what would be expected in areas of high cell network coverage.  They 

amplify a weak or shadowed signal in mobile, marine and in-building applications.

When using a Wilson amplifier in conjunction with Wilson antennas, the outside antenna 

will collect the cell tower signal and send it through the cable to the amplifier.  Cell phones 

and cellular data cards (laptops) then communicate with the improved signal.  When a cell 

phone or cellular data card transmits, the signal is amplified by the amplifier and broadcast 

back to the cell tower through the outside antenna.

Direct connection

amplifier

6‘ extension

cable

DC plug-in power

supply