Wilson Electronics LLC 460009 사용자 설명서

ENGLISH

To purchase a mounting plate contact 

weBoost Sales Team 435-673-5021.
1.   Remove two screws from back of 

Signal Booster that correspond with 

the mounting plate.

2.   Place Signal Booster on mounting 

plate and reinstall the two screws 

previously removed from back of 

Signal Booster.

 

2.   Select a location to install the Signal 

Booster that is away from excessive 

heat, direct sunlight, moisture and 

that has proper ventilation. Do not 

place the Signal Booster in an  

air-tight enclosure.

3.   Run the Outside Antenna cable to 

the Signal Booster and attach it 

to the connector labeled “Outside 

Antenna.”

4.   An external adapter may be needed 

to connect the cellular device to 

the Signal Booster. The external 

adapter plugs into the included 

antenna extension cable and directly 

into a socket on the cellular device. 

Run the extension cable from the 

external adapter and attach it to the 

connector labeled “cell phone or 

data card” on the Signal Booster.

 Note: Be careful when plugging 

5.   Before powering up the Signal 

Booster verify that connections 

are tight. An AC surge protector is 

recommended for all installations 

(not included).