Wilson Electronics LLC 460033 사용자 설명서

4

The term “IC” before the radio certification number only signifies that Industry Canada technical specifications were met.  
ISED CPC-2-1-05: http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08942.html

Sprint:  http://www.sprint.com/legal/fcc_boosters.html 

T-Mobile/MetroPCS:  https://support.t-mobile.com/docs/DOC-9827 

Verizon Wireless:  http://www.verizonwireless.com/wcms/consumer/register-signal-booster.html 

AT&T:  https://securec45.securewebsession.com/attsignalbooster.com/ 

U.S. Cellular:  http://www.uscellular.com/uscellular/support/fcc-booster-registration.jsp

BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have 
your provider’s consent. Most wireless providers consent to the use of signal boosters. 
Some providers may not consent to the use of this device on their network. If you are 
unsure, contact your provider.

In Canada, BEFORE USE you must meet all requirements set out in ISED CPC-2-1-05.  
You MUST operate this device with approved antennas and cables as specified by the 
manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from (i.e., MUST 
NOT be installed within 20 cm of) any person.

You MUST cease operating this device immediately if requested by the FCC (or ISED in 
Canada) or licensed wireless service provider.

WARNING. E911 location information may not be provided or may be inaccurate for calls 
served by using this device.

 To uphold compliance with network protection standards, all active 
cellular devices must maintain at least 3 feet of separation distance 
from Inside Antennas.

 RF Safety Warning:   Any antenna used with this device must be located at least 8 

inches from all persons.