Netgear 05200007 사용자 설명서

C-4

NETGEAR ProSafe VPN Client to NETGEAR FVS318 or FVM318 VPN Routers

–

In the Connection Name box, enter in a unique name for the VPN tunnel to be configured 
between the NETGEAR devices. For this example we have used VPNclient.

–

Enter a Local IPSec Identifier for the NETGEAR FVS318 Gateway A. In this example we 
used FVSrouter.dyndns.org as the local identifier.

 

–

Enter a Remote IPSec Identifier name for the remote NETGEAR VPN Client. In this 
example we used VPNclient as the remote identifier.

 

–

Choose “a subnet of local addresses” from the “Tunnel can be accessed from” menu.

–

Type the starting LAN IP Address of Gateway A (192.168.0.0 in our example) in the 
Local IP Local LAN start IP Address field.

–

Type the LAN Subnet Mask of Gateway A (255.255.255.0 in our example) in the Local 
LAN IP Subnetmask field.

–

Choose A Single Remote Address from the “Tunnel can access” pull-down menu.

It is critical that the information entered for the Local IPSec Identifier match 

exactly what you configure in the NETGEAR VPN Client ID Type menus. Please see 

 below.