Netgear 05200007 사용자 설명서
Reference Manual for the NETGEAR ProSafe VPN Client
Configuring L2TP Connections
4-3
202-10015-01
6.
In the Phone number box, type the IP address of the remote party's LNS.
7.
In the Dial using box, click SafeNet_VPN x Adapter, where x is the number of the VPN
adapter.
adapter.
8.
Click the Server tab.
9.
Click OK.
For Windows 2000
1.
On the Windows desktop, click Start>Settings>Network and Dial-up Connections. The
Network and Dial-up Connections window opens.
Network and Dial-up Connections window opens.
2.
Double-click Make New Connection. The Network Connection Wizard opens.
Note: If this is the first dial-up connection for your computer, you may be prompted to provide
some preliminary data. Follow the prompts until you return to the Network Connection
Wizard.
some preliminary data. Follow the prompts until you return to the Network Connection
Wizard.
3.
On the Network Connection Type page, take these steps:
a.
Click Connect to a private network through the Internet.
b.
Click Next.
4.
On the Select a Device page, take these steps:
a.
In the Select the devices to use in this connection list, as many of the check boxes that
apply; you must select at least one. If you're not sure which ones to select, contact your
network administrator.
apply; you must select at least one. If you're not sure which ones to select, contact your
network administrator.
b.
Click Next.
5.
On the Public Network page, take these steps:
a.
Click Do not dial the initial configuration.
b.
Click Next.
6.
On the Destination Address page, identify the remote party's L2TP server:
a.
In the Host name or IP address box, type the IP address of the remote party's L2TP
network server.
network server.
b.
Click Next.
7.
On the Connection Availability page, select whether to make this connection available to
only you or all others who use your computer:
only you or all others who use your computer: