Netgear 05200007 사용자 설명서

5-18

Using the Security Policy Editor

3.

Click  

(or 

Edit>Add Connection). A highlighted New Connection entry displays in the 

Network Security Policy list.

4.

Rename the new connection.

5.

In the Connection Security group, take these steps:

a.

Click the security level:

•

Secure 

 secures communications for this connection. This is the default.

•

Non-secure 

 allows communications for this connection to pass through 

unsecured, or not encrypted. 

•

Block 

 prohibits all communications for this connection from passing through.

b.

When the Secure 

 security level is selected, the Only Connect Manually check box 

appears. By default, the check box is clear; this means that the client establishes and 
terminates connections automatically as needed. You can, however, Initiate and end secure 
sessions manually. 

To require the user to manually establish and terminate all secure sessions using this 
connection (with the Connect and Disconnect options on the client icon's shortcut menu), 
select the Only Connect Manually check box.

If a connection for which the Only Connect Manually check box is selected isn't 
manually connected, traffic that would otherwise go over this connection is bypassed, as 
though there were no connection configured for this traffic. Traffic that would go over that 
connection if it were active is instead compared against the remaining connections in the 
Network Security Policy box to determine how to handle it.