Netgear 07300069 사용자 설명서

1-7

The WN111 has indicators in three locations that show the status of your connection to a wireless 
network and to the Internet:

•

WN111 Icon: After you install the WN111 software, the 

 icon appears on the desktop and 

in the lower right of the Windows task bar. It is color coded to show the status of the 
connection. 

•

Smart Wizard Status Bar: Clicking on the system tray icon opens the Smart Wizard. The 
status bar at the bottom of the page shows details about your wireless and Internet 
connection.See 

•

LED: The LED on the wireless USB adapter shows the network connection. Solid indicates a 
connection. The LED blinks when the wireless USB adapter is looking for a network 
association.

The WN111 icon is on the desktop and in the Windows System Tray. The System Tray is on one 
end of the taskbar in the Microsoft Windows desktop. 

Note: The maximum speed of a USB v2.0 port is 480 Mbps. If your computer has a USB 

v1.1 port, the WN111 is limited to that port’s maximum speed, which is 14 Mbps.

Red

The wireless USB adapter 
has no connection to any 
other wireless node.

The wireless USB adapter cannot link to any other wireless 
node or the link is lost. Check your configuration or try moving 
to a location where the wireless signal quality is better.

Yellow

The wireless USB adapter 
has a connection with another 
wireless node.

The wireless link is weak. You may need to move to a better 
spot, such as closer to the wireless access point. Also, look 
for possible interference such as a 2.4 GHz cordless phone or 
large metal surface.

Green

The wireless USB adapter 
has a connection with another 
wireless node.

The wireless USB adapter has established good 
communication with an access point and the signal quality is 
strong.