Netgear 07300071 사용자 설명서

24

Help with Troubleshooting

If you cannot connect after several minutes, you might be using an incorrect service name, 
user name, or password. There also might be a provisioning problem with your ISP.

If your wireless router can obtain an IP address but your computer is unable to load any Web pages 
from the Internet, check the following.

•

Your computer might not recognize any DNS server addresses. 

A DNS server is a host on the Internet that translates Internet names (such as www addresses) 
to numeric IP addresses. Typically your ISP provides the addresses of one or two DNS servers 
for your use. If you entered a DNS address when you configured the wireless router, restart 
your computer. Alternatively, you can configure your computer manually with DNS addresses, 
as explained in the documentation for your computer.

•

Your computer might not have the wireless router configured as its default gateway.

Restart the computer, and verify that the wireless router address (192.168.1.1) is listed by your 
computer as the default gateway address.

This section explains how to restore the factory default configuration settings, changing the 
router’s administration password to password and the IP address to 192.168.1.1. 

Unless you connect manually, the wireless router will not authenticate using PPPoE 
until data is transmitted to the network.

The factory default wireless router address is 192.168.1.1. However, if the router 
detects a conflict with the address it gets from your modem, it automatically picks a 
different address for itself. In this case, you can log in to the router using 
www.routerlogin.net to verify its LAN IP address. Click the LAN IP Setup link in 
the Advanced menu. Take note of the LAN TCP/IP setup IP address, which should 
match the default gateway IP address on your computer.

This procedure will erase all the current configuration settings and restore the factory 
defaults.