Netgear 08100080 사용자 설명서

2-17

4. Select the Create with Passphrase radio button, and enter the passphrase. The configuration 

utility automatically generates the WEP keys.

If the passphrase method is not available in the other devices, you must manually enter the 
keys to match exactly what is in the access point and other 802.11n, 802.11b, or 802.11g 
wireless devices.

5. Save your settings in a profile. 

a. Click the Save Profile button. All the configuration settings are saved in this profile. 

b. Click Apply, and then click Close to exit the Smart Wizard.

Follow these steps to configure WPA2-PSK s

1. Run the Smart Wizard.

a. Make sure that the NETGEAR software is installed and that the Wireless Express Card is 

fully inserted in the Express Card slot in your computer.

b. Use the 

 icon to open the Smart Wizard. The Settings tab displays.

2. Configure the security settings. 

a. In the Profile field, select the profile, or type in a profile name.

Note: The characters are case-sensitive. Be sure to use the same passphrase for all the 

wireless devices in the network.