Netgear 08200086 사용자 설명서
NETGEAR Wireless-N Access Point WN802Tv2 Reference Manual
Management
4-5
v1.0, June 2008
To restore settings from a backup file:
1. In Step 1 of the previous section, click Restore Settings on the side menu..
Figure 4-4 Restore saved configuration settings
2. Click Browse at the Restore Saved Settings from a File box. Locate and select the previously
saved backup file (by default, Config).
3. Click Apply.
The wireless access point is restored to its previous settings and restarts. This takes about one
minute.
minute.
Warning: Do not try to go online, turn off the access point, shut down the
computer or do anything else to the access point until it finishes
restarting. When the PWR light turns green (access point has
rebooted), wait a few more seconds before doing anything with the
access point.
restarting. When the PWR light turns green (access point has
rebooted), wait a few more seconds before doing anything with the
access point.
Rebooting the NETGEAR Wireless-N Access Point
You can reboot the wireless access point from the browser interface or by using the Reset button
on the rear panel (see
on the rear panel (see
To reboot the wireless access point from the user interface: