Netgear 10300138 사용자 설명서

SSID and WEP/WPA Settings Setup Form

For a new wireless network, print or copy this form and fill in the configuration parameters. 
For an existing wireless network, the person who set up or is responsible for the network can 
provide this information. Be sure to set the regulatory domain correctly as the first step.

The service set identification (SSID) identifies the wireless local area network. 

 is the default WNAP320 SSID. However, you can customize it by using 

up to 32 alphanumeric characters. Write your customized SSID here. 

___________________________________

Note: The SSID in the product family is the SSID you configure in the wireless adapter card. All 
wireless nodes in the same network must be configured with the same SSID. 

Authentication. 

Circle one: Open System or Shared Key. (Choose Shared Key for more security.)

If you select Shared Key, the other devices in the network will not connect unless 

they are set to shared key as well and have the same keys in the same positions as those 
in the WNAP320.

WEP Encryption Keys.

Circle one: 64, 128, or 152 bits. (Enter all four 802.11b/g/n keys for the key size chosen.)

Key 1: ___________________________________ 

Key 2: ___________________________________ 

Key 3: ___________________________________ 

Key 4: ___________________________________ 

WPA-PSK (Preshared Key)

Record the WPA-PSK key ___________________________________ 

WPA RADIUS Settings. For WPA, record the following settings for the primary and 

secondary RADIUS servers:

Server Name/IP Address: Primary _________________ Secondary 
__________________ 

Port: ___________________________________ 

Shared Secret: ___________________________________ 

___________________________________ 

Use the procedures described in the following sections to configure the WNAP320. Store this 
information in a safe place.