Netgear 10300143 사용자 설명서

Factory Default Settings

You can use the Restore Factory Settings located on the bottom of your gateway to reset all 
settings to their factory defaults. 

This is called a hard reset. To perform a hard reset, push and hold the reset button for 5 
seconds. The gateway reboots and returns to the settings shown in the following table.

Radio data rates

1, 2, 5.5, 6, 9, 12, 18, 24, 36, 48, 54, and 108 Mbps  
Auto Rate Sensing

Frequency

2.4-2.5 GHz

Operating frequency ranges

2.412~2.462 GHz (US)
2.412~2.472 GHz (Japan)
2.412~2.472 GHz (Europe ETSI)

Encryption

40-bit (also called 64-bit), 128-bit WEP data encryption,  

WPA-PSK(TKIP), and WPA2-PSK(AES)

Gateway Login

User login URL

http://192.168.1.1

User names and passwords (case 
sensitive)

• MSO/changme
• admin/password

Local Network (LAN)

LAN IP

192.168.0.1

Subnet mask

255.255.255.0

DHCP server

Enabled

DHCP starting IP address

192.168.0.10

DHCP Ending IP address

192.168.0.19

Firewall

Inbound communication from the Internet Disabled (except traffic on port 80, the http port)

Outbound communication to the Internet Enabled (all)

Source MAC filtering

Disabled