Netgear 12300211 사용자 설명서

Click Done. The VPN Policies screen displays, showing that the new tunnel is enabled:

To view or modify the tunnel settings, select its radio button and click Edit. 

See 

124 for information about how to 

enable the IKE keep-alive capability on an existing VPN tunnel.

Step 2: Configure the VPN Client

This section describes how to configure the NETGEAR ProSafe VPN Client on a remote PC. 
These instructions assume that the PC running the client has a dynamically assigned IP 
address.

The Windows PC has to have the NETGEAR ProSafe VPN Client program installed that 
supports IPSec. Go to the NETGEAR website (

how to purchase the NETGEAR ProSafe VPN Client.

Before installing the NETGEAR ProSafe VPN Client software, be 

sure to turn off any virus protection or firewall software you might be 
running on your PC. You might need to insert your Windows CD to 
complete the installation.

Install the NETGEAR ProSafe VPN Client on the remote PC, and then reboot.

Install the IPSec component. You might have the option to install either the VPN 

adapter or the IPSec component or both. The VPN adapter is not necessary.

If you do not have a modem or dial-up adapter installed in your PC, you might see the 
warning message stating “The NETGEAR ProSafe VPN Component requires at least 
one dial-up adapter be installed.” You can disregard this message.

Reboot the remote PC.

The ProSafe icon (

) is in the system tray.

Double-click the ProSafe icon to open the Security Policy Editor.

Add a new connection.

107, create a VPN connection.