Netgear 12300211 사용자 설명서

Click Apply when you are finished to display the VPN Policies screen.

To view or modify the tunnel settings, select the radio button next to the tunnel entry, and 

then click Edit. 

Step 2: Configure Gateway B (Router at the Regional Office)

This procedure assumes that the PC running the client has a dynamically assigned IP 
address. The PC needs to have a VPN client program installed that supports IPSec (in this 
case study, the NETGEAR VPN ProSafe Client is used). Go to the NETGEAR website 
(

) for information about how to purchase the NETGEAR ProSafe VPN 

Client.

Before installing the software, be sure to turn off any virus protection 

or firewall software you might be running on your PC.

Install the NETGEAR ProSafe VPN Client on the remote PC, and then reboot.

You might need to insert your Windows CD to complete the installation.

If you do not have a modem or dial-up adapter installed in your PC, you might see 

the warning message stating “The NETGEAR ProSafe VPN Component requires at 

least one dial-up adapter be installed.” You can disregard this message.

Install the IPSec component. You might have the option to install either the VPN 

adapter or the IPSec component or both. The VPN adapter is not necessary.

The system should show the ProSafe icon (

) in the system tray after rebooting.