Netgear 12300211 사용자 설명서

Modem Router Setup Preparation

You can set up your modem router with the NETGEAR genie automatically, or you can use 
the genie menus and screens to set up your modem router manually. Before you start the 
setup process, get your ISP information and make sure the computers and devices in the 
network have the settings described here.

Use Standard TCP/IP Properties for DHCP

If you set up your computer to use a static IP address, you need to change the settings so 
that it uses Dynamic Host Configuration Protocol (DHCP). 

Gather ISP Information

If you have DSL broadband service, you might need the following information to set up your 
modem router and to check that your Internet configuration is correct. Your Internet service 
provider (ISP) should have provided you with all of the information needed to connect to the 
Internet. If you cannot locate this information, ask your ISP to provide it. When your Internet 
connection is working, you no longer need to launch the ISP’s login program on your 
computer to access the Internet. When you start an Internet application, your modem router 
automatically logs you in. Make sure that you have the following information:

The ISP configuration information for your DSL account

ISP login name and password

Fixed or static IP address settings (special deployment by ISP; this is rare)

Wireless Devices and Security Settings

Make sure that the wireless device or computer that you are using supports WPA or WPA2 
wireless security, which is the wireless security supported by the modem router. 

Types of Logins and Access

There are separate types of logins that have different purposes. It is important that you 
understand the difference so that you know which login to use when.

 logs you in to the modem router interface from NETGEAR genie. 

See 

 logs you in to your Internet service. Your service provider has provided you with 

this login information in a letter or some other way. If you cannot find this login 
information, contact your service provider.

. Your modem router is preset with a unique wireless 

network name (SSID) and password for wireless access. This information is on the label 
on the bottom of your modem router.