Netgear 12300211 사용자 설명서

. If you connected a USB storage device to the modem router, then it is 

displayed here.

. Set up a guest network to allow visitors to use your modem router’s 

Internet connection.

. Set the modem router up for unique situations such as when remote 

access by IP or by domain name from the Internet is needed. See 

. You need a solid understanding of networking protocols to use this tab.

. Go to the NETGEAR support site to get information, help, and product 

documentation. These links work once you have an Internet connection.

Join Your Wireless Network

You can use the manual or the WPS method to join your wireless network. See 

35 for instructions about how to set up a guest network.

Manual Method

With the manual method, choose the network that you want and type its password to 
connect.



On your computer or wireless device, open the software that manages your wireless 

connections. This software scans for all wireless networks in your area.

Look for your network and select it. 

The unique WiFi network name (SSID) and password is on the router label. If you 
changed these settings, then look for the network name that you used.

Enter the modem router password and click Connect.

Wi-Fi Protected Setup (WPS) Method

Wi-Fi Protected Setup (WPS) lets you connect to a secure WiFi network without typing its 
password. Instead, press a button or enter a PIN. NETGEAR calls WPS Push 'N' Connect.

Some older WiFi equipment is not compatible with WPS. WPS works only with WPA2 or WPA 
wireless security.



Press the WPS button on the modem router front panel

.

Within 2 minutes, press the WPS button on your wireless device or follow the WPS 

instructions that came with the device. 

The WPS process automatically sets up your wireless computer with the network 
password and connects you to the wireless network.