Netgear 12400226 사용자 설명서



From the Advanced tab, select Advanced Setup > Wireless Features.

The following screen displays.

The following settings are available on this part of the screen:

Disable Gateway’s PIN. The PIN function might temporarily be disabled when the 
modem router detects suspicious attempts to break into the modem router’s wireless 
settings by using the modem router’s PIN through WPS. You can manually enable the 
PIN function by clearing the Disable Gateway’s PIN check box. 

Keep Existing Wireless Settings. By default, the Keep Existing Wireless Settings check 
box is selected. NETGEAR recommends that you leave this check box selected.

If you clear this check box, the next time a new wireless client uses WPS to connect to 
the modem router, the modem router wireless settings change to an automatically 
generated random SSID and security key.

WMM Support. WMM (Wireless Multimedia) is a subset of the 802.11e standard. WMM 
allows wireless traffic to have a range of priorities, depending on the kind of data. 
Time-dependent information, like video or audio, has a higher priority than normal traffic. 
For WMM to function properly, wireless clients must support WMM also.

By default, any wireless computer or device that is configured with the correct SSID is 
allowed access to your wireless network. For increased security, allow only specific wireless 
computers and devices to access the wireless network based on their MAC addresses.