Netgear 14100256 사용자 설명서
Manage Your Network
80
N300 Wireless Router
8.
In the Traffic Counter section, set the traffic counter to begin at a specific time and date.
If you want the traffic counter to start immediately, click the Restart Counter Now button.
9.
In the Traffic Control section, specify whether the router should issue a warning message
before the monthly limit of Mbytes or hours is reached.
before the monthly limit of Mbytes or hours is reached.
By default, the value is 0 and no warning message is issued. You can select one of the
following to occur when the limit is attained:
following to occur when the limit is attained:
•
The Internet LED blinks green or amber.
•
The Internet connection is disconnected and disabled.
10.
Click the Apply button.
The Internet Traffic Statistics section helps you to monitor the data traffic.
11.
To update the Traffic Statistics section, click the Refresh button.
12.
To display more information about the data traffic on your router and to change the poll
interval, click the Traffic Status button.
interval, click the Traffic Status button.
Manage the Router Configuration File
The configuration settings of the router are stored within the router in a configuration file. You
can back up (save) this file to your computer, restore it, or reset it to the factory default
settings.
can back up (save) this file to your computer, restore it, or reset it to the factory default
settings.
Back Up Settings
To back up the router’s configuration settings:
1.
Launch a web browser from a computer or wireless device that is connected to the
network.
network.
2.
In the address field of the web browser, enter www.routerlogin.net or
www.routerlogin.com.
www.routerlogin.com.
A login screen displays.
3.
Enter the router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
password are case-sensitive.
The BASIC Home screen displays.
DRAFT