Netgear 16200339 사용자 설명서

Quick Start

Model R9000

Unplug your modem, remove and replace the backup battery if it uses 
one, and then plug the modem back in. Use the Ethernet cable to 
connect the modem to the yellow Internet port on the router.

Note: 

If your Internet connection does not require a modem, connect 

your main Ethernet cable to the yellow Internet port on the router.

Connect the router to a power source. The router’s Power LED 

 

lights amber and then turns white when the router is ready. 

Make sure that the router’s WiFi LED 

 is lit. Look on the router’s 

label for the preassigned WiFi network name (SSID) and network key 
(password).
Open the WiFi connection manager on your WiFi‑enabled computer 
or mobile device, find the router’s SSID, and use the router’s password 
to connect to the router’s WiFi network.
Launch a web browser. If the installation assistant does not display, 
visit 

. If a login window displays, enter 

admin for 

the admin user name and 

password for the admin password.

Follow the on‑screen instructions to connect to the Internet.
The router’s Internet LED 

 lights white when the router is 

connected to the Internet.

For the best WiFi performance, position the antennas as shown.