Netgear 16400360 사용자 설명서

Quick Start

Model R6120

Unplug your modem, remove and replace the backup battery if it uses one, and 
then plug the modem back in. Use the Ethernet cable to connect the modem to 
the blue Internet port on the router.

Note: 

If your Internet connection does not require a modem, connect your main 

Ethernet cable to the blue Internet port on the router.

Connect the router to a power source. The router’s Power LED 

 lights green 

when the router is ready. 

Make sure that the router’s WiFi LED 

 is lit. Look on the router label for the 

preassigned WiFi network name (SSID) and network key (password).
Open the WiFi connection manager on your computer or other WiFi-enabled 
device, find the router’s WiFi network name, and use the router’s password to 
connect.
Launch a web browser. If the NETGEAR installation assistant does not display, visit 

. If a login window displays, enter 

admin for the user name 

and 

password for the password. Follow the onscreen instructions.

The router’s Internet LED lights 

 green when the router is connected to the 

Internet.

For the best WiFi performance, position the antennas as shown.