Netgear DG834GT 사용자 설명서

Troubleshooting

8-7

A DNS server is a host on the Internet that translates Internet names (such as www addresses) 
to numeric IP addresses. Typically your ISP will provide the addresses of one or two DNS 
servers for your use. If you entered a DNS address during the router’s configuration, reboot 
your computer and verify the DNS address as described in 

. Alternatively, you can configure your computer manually with DNS addresses, as 

explained in your operating system documentation.

•

Your computer may not have the router configured as its TCP/IP router.

If your computer obtains its information from the router by DHCP, reboot the computer and 
verify the router address as described in 

.

Most TCP/IP terminal devices and routers contain a ping utility that sends an echo request packet 
to the designated device. The device then responds with an echo reply. Troubleshooting a TCP/IP 
network is made very easy by using the ping utility in your computer.

You can ping the router from your computer to verify that the LAN path to your router is set up 
correctly.

To ping the router from a PC running Windows 95 or later:

1.

From the Windows toolbar, click the Start button and select Run.

2.

In the field provided, type Ping followed by the IP address of the router, as in this example:

3.

Click OK.

You should see a message like this one:

If the path is working, you see this message:

If the path is not working, you see this message:

If the path is not functioning correctly, you could have one of the following problems: