Netgear DG834GT 사용자 설명서

Connecting the Router to the Internet

3-11

Note: If instead of the Setup Wizard menu, the main menu of the router’s Configuration 
Manager as shown in 

 appears, click the Setup Wizard link in the upper left to 

bring up this menu.

2.

You must select a country and language. Language choices are English, French, German, and 
Italian. After you change the language, the remaining setup screens change to the language of 
your choice.

3.

Select Yes to allow the router to automatically determine your connection.

4.

Click Next.

The Setup Wizard will now check for the following connection types:

•

Dynamic IP assignment

•

A login protocol such as PPPoE or PPPoA

•

Classical IP over ATM (RFC1577)

•

Fixed IP address assignment

Next, the Setup Wizard will report which connection type it has discovered, and then display 
the appropriate configuration page. If the Setup Wizard finds no connection, you will be 
prompted to check the physical connection between your router and the ADSL line. When the 
connection is properly made, the router’s Internet LED should be on.

5.

The ADSL settings for the multiplexing method and VPI/VCI will update with the preset 
defaults. The multiplexing method preset default settings will usually work. Only change the 
multiplexing method if you are sure your ISP requires Virtual Path Identifier (VPI) or Virtual 
Channel Identifier (VCI) settings that are different from the default values. 

Incorrect VPI or VCI settings will prevent you from connecting to the Internet. To change 
these settings, click the ADSL Settings link on the main menu. See 

 for more details.

The procedures for filling in the configuration page for each type of connection follow below.

If the Setup Wizard determines that your Internet service account uses a login protocol such as 
PPP over Ethernet (PPPoE), you will be directed to the PPPoE page shown in 

: