Netgear DG834Gv2 사용자 설명서

8-4

Troubleshooting

•

Click the Refresh or Reload button in the Web browser. The changes may have occurred, but 
the Web browser may be caching the old configuration.

If your router is unable to access the Internet, you should check the ADSL connection, then the 
WAN TCP/IP connection. 

If your router is unable to access the Internet, you should first determine whether you have an 
ADSL link with the service provider. The state of this connection is indicated with the WAN LED.

If your WAN LED is green or blinking green, then you have a good ADSL connection. You can be 
confident that the service provider has connected your line correctly and that your wiring is 
correct.

If your WAN LED is blinking yellow, then your gateway is attempting to make an ADSL 
connection with the service provider. The LED should turn green within several minutes. 

If the WAN LED does not turn green, disconnect all telephones on the line. If this solves the 
problem, reconnect the telephones one at a time, being careful to use a microfilter on each 
telephone. If the microfilters are connected correctly, you should be able to connect all your 
telephones.

If disconnecting telephones does not result in a green WAN LED, there may be a problem with 
your wiring. If the telephone company has tested the ADSL signal at your Network Interface 
Device (NID), then you may have poor quality wiring in your house.

If the WAN LED is off, disconnect all telephones on the line. If this solves the problem, reconnect 
the telephones one at a time, being careful to use a microfilter on each telephone. If the microfilters 
are connected correctly, you should be able to connect all your telephones.