Netgear DG834Gv2 사용자 설명서

3-2

Connecting the Router to the Internet

Each device such as a telephone, fax machine, answering machine, or caller ID display will require 
an ADSL microfilter.

Do not connect the DG834G to the ADSL line through a microfilter unless the microfilter is 

a combination microfilter/splitter specifically designed for this purpose. Doing so will prevent the 
built-in ADSL modem in the DG834G from establishing a connection to the Internet. If you have 
any doubts about this, connect the DG834G directly to the ADSL line.

Use an ADSL microfilter with built-in splitter when there is a single wall outlet which must 
provide connectivity for both the DG834G and telephone equipment.

The DG834G wireless router connects to your Ethernet LAN via twisted-pair cables. If the 
computer will connect to your network at 100 Mbps, you must use a Category 5 (CAT5) cable such 
as the one provided with your router.

To use the DG834G wireless router on your network, each computer must have an installed 
Ethernet adapter and an Ethernet cable, or a 802.11b wireless adapter. 

For the initial connection to the Internet and configuration of your router, you need to connect a 
computer to the router which is set to automatically get its TCP/IP configuration from the router 
via DHCP.

Please refer to 

 for assistance with DHCP 

configuration.