Netgear DG834Gv2 사용자 설명서

4-8

Wireless Configuration

4.

If the wireless station is currently connected to the network, you can select it from the 
Available Wireless Stations list. Click Add to add the station to the Trusted Wireless Stations 
list.

5.

If the wireless station is not currently connected, you can enter its address manually. Enter the 
MAC address of the authorized computer. The MAC address is usually printed on the wireless 
card, or it may appear in the router’s DHCP table. The MAC address will be 12 hexadecimal 
digits.

Click Add to save your entry.

You can copy and paste the MAC addresses from the router’s Attached Devices menu 

into the MAC Address box of this menu. To do this, configure each wireless computer to 
obtain a wireless link to the router. The computer should then appear in the Attached Devices 
menu.

6.

Make sure the Turn Access Control On check box is selected, then click Apply.

Now, only devices on this list will be allowed to wirelessly connect to the DG834G. This prevents 
unauthorized access to your network. 

Note: If you are configuring the router from a wireless computer whose MAC address is 
not in the Trusted Wireless Stations list, and you select Trusted Wireless Stations only, 
you will lose your wireless connection when you click Apply. You must then access the 
router from a wired computer to make any further changes.