Netgear fwag114 사용자 설명서

Introduction

1-3

The FWAG114 will log security events such as blocked incoming traffic, port scans, attacks, 
and administrator logins. You can configure the router to email the log to you at specified 
intervals. You can also configure the router to send immediate alert messages to your email 
address or email pager whenever a significant event occurs.

•

With its content filtering feature, the FWAG114 prevents objectionable content from reaching 
your PCs. The router allows you to control access to Internet content by screening for 
keywords within Web addresses. You can configure the router to log and report attempts to 
access objectionable Internet sites.

The FWAG114 wireless firewall is equipped with several features designed to maintain security, as 
described in this section.

•

PCs Hidden by NAT

 

NAT opens a temporary path to the Internet for requests originating from the local network. 
Requests originating from outside the LAN are discarded, preventing users outside the LAN 
from finding and directly accessing the PCs on the LAN.

•

Port Forwarding with NAT

 

Although NAT prevents Internet locations from directly accessing the PCs on the LAN, the 
router allows you to direct incoming traffic to specific PCs based on the service port number 
of the incoming request, or to one designated “DMZ” host computer. You can specify 
forwarding of single ports or ranges of ports.

With its internal 8-port 10/100 switch, the FWAG114 can connect to either a 10 Mbps standard 
Ethernet network or a 100 Mbps Fast Ethernet network. Both the LAN and WAN interfaces are 
autosensing and capable of full-duplex or half-duplex operation. 

The router incorporates Auto Uplink

TM

 technology. Each Ethernet port will automatically sense 

whether the Ethernet cable plugged into the port should have a ‘normal’ connection such as to a 
PC or an ‘uplink’ connection such as to a switch or hub. That port will then configure itself to the 
correct configuration. This feature also eliminates the need to worry about crossover cables, as 
Auto Uplink will accommodate either type of cable to make the right connection.