Netgear fwag114 사용자 설명서

다운로드
페이지 158
Reference Manual for the Model FWAG114 Cable/DSL Wireless ProSafe Firewall 
Wireless Configuration
3-3
 
Restrict Access Based on MAC Address. You can allow only trusted PCs to connect so that 
unknown PCs cannot wirelessly connect to the FWAG114. Restricting access by MAC address 
adds an obstacle against unwanted access to your network, but the data broadcast over the 
wireless link is fully exposed. 
Turn Off the Broadcast of the Wireless Network Name SSID. If you disable broadcast of 
the SSID, only devices that have the correct SSID can connect. This nullifies the wireless 
network ‘discovery’ feature of some products such as Windows XP, but the data is still fully 
exposed.
Turn Off Bridging to the Wired LAN. If you disable bridging to the LAN, wireless devices 
cannot communicate with computers on the Ethernet LAN but can still access the Internet. 
This blocks any access to the computers on the wired LAN but the wireless data routed to the 
Internet is still fully exposed.
WEP. Wired Equivalent Privacy (WEP) data encryption provides data security. WEP Shared 
Key authentication and WEP data encryption will block all but the most determined 
eavesdropper. 
Understanding Wireless Settings
To configure the wireless settings of your firewall, click the Wireless 11a or Wireless 11b/g link in 
the Setup section of the main menu. The wireless settings menu will appear, as shown below.