Netgear FWG114P v2 사용자 설명서
Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P
Virtual Private Networking
8-45
March 2004, 202-10027-01
Testing the VPN Connection
You can test the VPN connection in several ways:
•
From the client PC to the FWG114P
•
From the FWG114P to the client PC
These procedures are explained below.
From the Client PC to the FWG114P
To check the VPN Connection, you can initiate a request from the remote PC to the FWG114P by
using the “Connect” option of the FWG114P Wireless Firewall/Print Server popup menu.
using the “Connect” option of the FWG114P Wireless Firewall/Print Server popup menu.
1.
Open the popup menu by right-clicking on the system tray icon.
2.
Select Connect to open the My Connections list.
3.
Choose FWG114P.
The FWG114P Wireless Firewall/Print Server will report the results of the attempt to connect.
Once the connection is established, you can access resources of the network connected to the
FWG114P.
FWG114P.
Another method is to ping from the remote PC to the LAN IP address of the FWG114P. To
perform a ping test using our example, start from the remote PC:
perform a ping test using our example, start from the remote PC:
1.
Establish an Internet connection from the PC.
2.
On the Windows taskbar, click the Start button, and then click Run.
3.
Type
ping -t 192.168.0.1
and click OK.
This will cause a continuous ping to be sent to the first FWG114P. After a period of up to two
minutes, the ping response should change from “timed out” to “reply.”
minutes, the ping response should change from “timed out” to “reply.”
Note:
Virus protection or firewall software can interfere with VPN communications. Be
sure such software is not running on the remote PC with the Netgear ProSafe VPN
Client and that the firewall features of the FWG114P are not set in such a way as to
prevent VPN communications.
Client and that the firewall features of the FWG114P are not set in such a way as to
prevent VPN communications.