Netgear HA501 사용자 설명서
Adapter LED’s
The WLAN adapter LED’s perform identical functions when indicating the operational
status of the card.
status of the card.
Off
No access point associated with the card.
Slow Blinking
Card is attempting to associate with an access point.
Fast Blinking
Card exchanged data with an access point. The higher the data rate, the faster the blinking.
Removing the PC Card
1
.
. Use the release lever or button your card slot to free the PC Card (Figure 3).
2
.
. Pull on the sides of the card to remove it from the slot. Do not pull on the antenna.
X
Caution: The antenna on the PC Card is not removable. Trying to remove the card by pulling
on the antenna can break the antenna, causing permanent damage to the card.
on the antenna can break the antenna, causing permanent damage to the card.
Installing the Documentation
More detailed installation procedures can be found in the Network Interface Card User
Guide.
Guide.
1
.
. Put the End User Utilities CD in the CD-ROM drive. The Setup program will start
automatically.
If the Setup program does not start, use Start/Run to run the SETUP.EXE program from the
CD-ROM drive.
CD-ROM drive.
2
.
. Select Documentation.
You can view the manuals from the CD.
3
.
. Select Install User Documentation to install the manuals on your hard disk. Follow
the instructions on the screen to complete the installation.
4
.
. Exit the setup program.
You can open the manuals from the PC Card program group.