Netgear HE102 사용자 설명서
Preliminary
Page 8
•
Access point User’s Guide
3 AP Network Attachment and Configuration
3.1 AP Network Configuration and Network Boot
Figure 1 shows an example connection of the AP to a Host PC (HPC). Follow these steps
to establish the physical connections:
to establish the physical connections:
1. Connect the AP Ethernet port to the HPC Ethernet card through the Ethernet
hub/switch or an Ethernet crossover cable. An Ethernet switch/hub or crossover
cable is not included.
cable is not included.
2. Plug in the 3.3 V power supply adapter (provided by NETGEAR) to the AP
power supply connector.
Figure 1 – Connection Between AP and Host PC
At this point, the Windows-based HPC needs the following configuration steps in order
to control the AP:
1. From the Start menu, choose Settings and open the Network and Dial-up
Connections window.
2. Right-click on the Local Area Network icon in the window, which belongs to the
Ethernet controller that is connected to the AP and select Properties.
Host PC
(HPC)
Ethernet Port
Ethernet Cable
HE102 Access Point
(AP)
Ethernet
Hub/Switch
Ethernet
Port
Power
Power
Supply
Ethernet Cable