Netgear MR814v2 사용자 설명서

 

85 

Model 

Wireless Router 

Dimensions 

189mm(W) * 122mm(D) * 27mm(H) 

Operating Tempera ture 

0

°

 C to 40

°

 C 

Storage Temperature 

-10

°

 C to 70

°

 C 

Network Protocol: 

TCP/IP 

Network Interface: 

5 Ethernet: 

4 * 10/100BaseT (RJ45) LAN connection 

1 * 10/100BaseT (RJ45) for WAN 

Wireless interface 

Wireless Access Point via built-in wireless module.  

LEDs 

12 

Power Adapter  

12 V DC External 

Relative humidity 

10% to 90%  

 

Standards  

IEEE802.11b WLAN, PCMCIA 2.1, JEIDA 4.2, roaming support  

Frequency  

2.4 to 2.4835GHz ( Industrial Scientific Medical Band ) 

Channels  

Maximum 14 Channels, depending on regulatory authorities  

Modulation 

DSSS BPSK/QPSK/CC 

Data Rate 

11 / 5.5 / 2 / 1 Mbps  

Coverage Area  

Indoors : 25m @11Mbps, 100m @5.5Mbps or lower 

Outdoors : 150m @11Mbps, 250m @5.5Mbps or lower 

WEP 

64Bit, 128Bit  

Output Power 

13dBm (typical) 

Receiver Sensitivity 

-80dBm M in. 

 

 

 

Wireless Router User Guide  

86 

This equipment has been tested and found to comply with the limits for a Class B digital device, 
pursuant to Part 15 of the FCC Rules.  These limits are designed to provide reasonable prote c-
tion against harmful interference in a residential installation.  

This equipment generates, uses and can radiate radio frequency energy and, if not installed and 
used in accordance with the instructions, may cause harmful interference to radio communic a-
tions. However, there is no guarantee that interference will not occur in a particular installation. 
If this equipment does cause harmful interference to radio or television reception, which can be 
determined by turning the equipment off and on, the user is encouraged to try to correct the 
interference by one of the following measures: 

•

 

Reorient or relocate the receiving antenna. 

•

 

Increase the separation between the equipment and receiver. 

•

 

Connect the equipment into an outlet on a circuit different from that to which the receiver is 
connected. 

•

 

Consult the dealer or an experienced radio/TV technician for help. 

To assure continued compliance, any changes or modifications not expressly approved by the 
party responsible for compliance could void the user's authority to operate this equipment. 
(Example  - use on ly shielded interface cables when connecting to computer or peripheral d e-
vices).  

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled 
environment. This equipment should be installed and operated with a minimum distance of 20 
centimeters between the radiator and your body. 

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two 
conditions:  

(1) This device may not cause harmful interference, and  

(2) this device must accept any interference received, including interference that may cause 
undesired operation. 

This transmitter must not be co-located or operating in conjunction with any other antenna or 
transmitter. 

 

This is a Class B product. In a domestic environment this product may cause radio interference 
in which case the user may be required to take ade quate measures.