Netgear WG102 사용자 설명서

Management

4-7

The Backup/Restore Settings menu allows you to save or retrieve a file containing your wireless 
access point’s configuration settings.

To save your settings, click the Save button. Your browser will extract the configuration file from 
the wireless access point and prompts you for a location on your computer to store the file. You 
can give the file a meaningful name at this time, such as WG102.cfg.

To restore your settings from a saved configuration file, enter the full path to the file on your 
computer or click the Browse button to locate the file. When you have located it, click the Retrieve 
button to upload the file. After completing the upload, the WG102 will reboot automatically.

It is sometimes desirable to restore the wireless access point to the factory default settings. This 
can be done by using the Restore function, which restores all factory settings. After a restore, the 
wireless access point's password will be password, the WG102's DHCP client is enabled, the 
default LAN IP address is 192.168.0.229, and the access point name is reset to the name printed on 
the label on the bottom of the unit.

To restore the factory default configuration settings without knowing the login password or IP 
address, you must use the Default Reset button on the rear panel of the wireless access point (see 

). The reset button has two functions:

•

Reboot.  When pressed and released, the Wireless Access Point will reboot (restart).

•

Reset to Factory Defaults.  This button can also be used to clear all data and restore all 
settings to the factory default values.

To clear all data and restore the factory default values:

1.

Power Off the WG102

2.

Hold the Reset Button down while you Power On the WG102 for 5 seconds.

3.

Continue holding the Reset Button until the LEDs blink twice.

4.

Release the Reset Button. 

The factory default configuration has now been restored, and the WG102 is ready for use.