Netgear WG111U 사용자 설명서
User’s Manual for the NETGEAR Super AG Wireless USB 2.0 Adapter WG111U
Appendix C-12
Preparing Your Network to Work with a Router
202-10065-01
DHCP Configuration of TCP/IP in Windows 2000
After you have installed the network card, TCP/IP for Windows 2000 is configured. TCP/IP
should be added by default and set to DHCP without your having to configure it. However, if there
are problems, follow these steps to configure TCP/IP with DHCP for Windows 2000.
should be added by default and set to DHCP without your having to configure it. However, if there
are problems, follow these steps to configure TCP/IP with DHCP for Windows 2000.
1. Check the Local Area Connection
Properties Settings.
a.
Click the My Network Places icon on
the Windows desktop. The Network
and Dial-up Connections window
opens.
the Windows desktop. The Network
and Dial-up Connections window
opens.
b. Right click on “Local Area
Connection” and select Properties.
The Local Area Connection Properties
dialog box appears, as shown to the
right.
dialog box appears, as shown to the
right.
c.
Verify that you have the correct
Ethernet card selected in the “Connect
using:” box.
Ethernet card selected in the “Connect
using:” box.
d. Verify that at least the following two
items are displayed and selected in the
“Components checked are used by this
connection:” box:
“Components checked are used by this
connection:” box:
•
Client for Microsoft Networks
•
Internet Protocol (TCP/IP)
e.
Click OK.