Netgear WG511V2H1 사용자 설명서
Installation Guide for the NETGEAR 54 Mbps Wireless PC Card WG511V2H1
Basic Setup
2-17
Verify wireless connectivity to your network.
a.
Open the WG511V2H1 utility by clicking on the icon in the Windows system tray.
b.
Click the Status tab page. Verify that your Connection and Status Monitor information
matches your wireless network.
matches your wireless network.
c.
Check the two WG511V2H1 LEDs:
•
Solid green for the LINK LED indicates a good connection. Blinking for the LINK
LED indicates attempting to connect. Off for the LINK LED indicates the card is
turned off or not fully plugged in.
LED indicates attempting to connect. Off for the LINK LED indicates the card is
turned off or not fully plugged in.
•
Blinking for the amber transmission LED indicates data transmission.
d.
Verify connectivity to the Internet or network resources.
Note: If you are unable to connect, see
Note: You can use the Site Survey
to verify the availability of wireless
networks and their SSIDs.
to verify the availability of wireless
networks and their SSIDs.
For more on information, please
see
see
.