Netgear WG511V2H1 사용자 설명서
Installation Guide for the NETGEAR 54 Mbps Wireless PC Card WG511V2H1
Configuration 3-25
Verify connectivity by using a browser such as Netscape or Internet Explorer to connect to the
Internet, or check for file and printer access on your network.
Internet, or check for file and printer access on your network.
Note: If you cannot connect, please see the
. Also,
for problems with accessing network resources, the Windows Client and File and Print
Sharing software might not be installed and configured properly on your computers. Please
refer to.
Sharing software might not be installed and configured properly on your computers. Please
refer to.
Connecting to Another PC in Ad-hoc Mode
Figure 3-4: NETGEAR WG511V2H1 Wireless PC Card in Peer-to-Peer Mode
The peer-to-peer setting of the WG511V2H1 uses Ad-Hoc mode. Ad-Hoc mode is an 802.11 networking
framework in which devices or computers communicate directly with each other, without the use
of an access point. For example, this mode is used when two Windows computers are configured
with file and print sharing enabled and you want to exchange files directly between them.
framework in which devices or computers communicate directly with each other, without the use
of an access point. For example, this mode is used when two Windows computers are configured
with file and print sharing enabled and you want to exchange files directly between them.
WG511V2H1 Wireless PC Card
in a Notebook Computer
in a Notebook Computer
PC with 802.11b or g
wireless adapter
wireless adapter