Netgear WGPS606 사용자 설명서
Reference Manual for the NETGEAR 54 Mbps Wireless USB Print Server with 4-Port Switch
Introduction
2-3
Draft 1, 01 Feb 05
Autosensing Ethernet Connections with Auto Uplink
The WGPS606 can connect to a standard Ethernet network. The LAN interface is autosensing and
capable of full-duplex or half-duplex operation. The wireless USB print server incorporates Auto
Uplink
capable of full-duplex or half-duplex operation. The wireless USB print server incorporates Auto
Uplink
TM
technology. The Ethernet port will automatically sense whether the Ethernet cable
plugged into the port should have a ‘normal’ connection such as to a PC or an ‘uplink’ connection
such as to a switch or hub. That port will then configure itself to the correct configuration. This
feature also eliminates any concerns about crossover cables, as Auto Uplink will accommodate
either type of cable to make the right connection.
such as to a switch or hub. That port will then configure itself to the correct configuration. This
feature also eliminates any concerns about crossover cables, as Auto Uplink will accommodate
either type of cable to make the right connection.
System Requirements
Before installing the WGPS606, make sure your network meets these requirements:
•
A Category 5 UTP straight through Ethernet cable with RJ-45 connector included in the
package, or one like it
package, or one like it
•
A 100-240 V, 50-60 HZ AC power source
•
A Web browser for configuration such as Microsoft Internet Explorer 5.0 or above, or
Netscape Navigator 4.78 or above
Netscape Navigator 4.78 or above
•
At least one Pentium class computer (or equivalent) with the TCP/IP protocol installed and a
CD-ROM drive
CD-ROM drive
•
Other 802.11b or 802.11g-compliant router or access point
What’s In the Box?
The product package should contain the following items:
•
NETGEAR WGPS606 54 Mbps Wireless USB Print Server with 4-Port Switch WGPS606
•
Power adapter and cord (12Vdc, 1.2A)
•
Straight through Category 5 Ethernet cable—10 feet (3.04 m)
•
Printed WGPS606 54 Mbps Wireless USB Print Server Installation Guide
•
Resource CD for the NETGEAR 54 Mbps Wireless Access Point WG602v3
–
–
Reference Manual for the NETGEAR 54 Mbps Wireless USB Print Server with 4-Port
Switch WGPS606 (202-10060-02)—this manual
Switch WGPS606 (202-10060-02)—this manual
–
Windows TCP/IP and Networking Tutorials
–
Animated Install Assistant