Netgear WGX102 사용자 설명서

Introduction

2-1

Congratulations on your purchase of the NETGEAR

®

 54 Mbps Wall-Plugged Router WGX102. 

The WGX102 router provides connection for multiple computers to the Internet through an 
external broadband access device (such as a cable modem or DSL modem) that is normally 
intended for use by a single computer. This chapter describes the features of the NETGEAR 54 
Mbps Wall-Plugged Router WGX102.

The 54 Mbps Wall-Plugged Router WGX102 connects your local area network (LAN) to the 
Internet through an XE102 Wall-Plugged Ethernet Bridge and an external access device such as a 
cable modem or DSL modem.

The WGX102 router provides you with multiple Web content filtering options, plus browsing 
activity reporting and instant alerts via e-mail. Parents and network administrators can establish 
restricted access policies based on time-of-day, Web site addresses and address keywords, and 
share high-speed cable/DSL Internet access for multiple computers. In addition to the Network 
Address Translation (NAT) feature, the built-in firewall protects you from hackers.

With minimum setup, you can install and use the router within minutes, without the need to run 
Ethernet cable throughout your home.

The WGX102 router provides the following features:

•

802.11g wireless networking, with the ability to operate in 802.11g-only, or 802.11b+g modes.

•

Easy, Web-based setup for installation and management.

•

Content Filtering and Site Blocking Security.

Note: This manual provides information on the complete features as of the date of 
publication. Earlier versions of this product may not have all the features presented in 
this manual. Go to 

where you will 

find product firmware updates for your WGX102.