Netgear WGX102 사용자 설명서

3-8

Connecting the Router to the Internet

Here are some tips for correcting simple problems you may have.

1) Turn off the modem, wireless router, and computer; 2) Turn on the modem, wait two 
minutes; 3) Turn on the wireless router and wait 1 minute; 4) Turn on the computer. 

•

The Internet status light on the wireless router will be lit if the Ethernet cable to the wireless 
router from the modem is plugged in securely and the modem and wireless router are turned 
on. 

•

For each powered on computer connected to the wireless router with a securely plugged in 
Ethernet cable, the corresponding wireless router LAN port status light will be lit. The label on 
the bottom of the wireless router identifies the number of each LAN port. 

The Wireless Network Name (SSID) and WEP settings of the router and wireless computer 
must match exactly. 

•

LAN and wirelessly connected computers must be configured to obtain an IP address 
automatically via DHCP. Please see 

 or the animated 

tutorials on the CD for help with this.

•

Some cable modem ISPs require you to use the MAC address of the computer registered on 
the account. If so, in the Router MAC Address section of the Basic Settings menu, select “Use 
this Computer’s MAC Address.” The router will then capture and use the MAC address of the 
computer that you are now using. You must be using the computer that is registered with the 
ISP. Click Apply to save your settings. Restart the network in the correct sequence.

•

If the Power light does not turn solid green within 2 minutes after turning the router on, reset 
the router according to the instructions in 

•

If the Wireless light does not come on, verify that the wireless feature is turned on according to 
the instructions in 

.