Microsoft Corporation RM-2 사용자 설명서
M e n u f u n c t i o n s
91
•
Memory status
to view the amount of free, used and total amount of
memory for each function. You may also find memory information in
the menus of some functions, for example in the
the menus of some functions, for example in the
Applications
menu.
• Select
Automatic keyguard
to set the keypad of your phone to lock
automatically after a pre-set time delay when the phone is in
standby mode and no function of the phone has been used. Select
standby mode and no function of the phone has been used. Select
On
and you can set the time from 5 seconds to 60 minutes.
See also Keypad lock (Keyguard) on page 28.
•
Security keyguard
to lock the keypad of the phone with a security
code, see Security code (5 to 10 digits) on page 13.
• Enter the security code. To set the security keyguard, select
On
.
The keypad lock remains active, if you open the flip.
To activate the security keyguard, press
Menu
and
within
1.5 seconds, when the flip is closed. To deactivate the keyguard
when the flip is open, press
when the flip is open, press
Unlock
and
OK
, then key in the
security code. If the flip is closed, press
Unlock
and
within
1.5 seconds, then key in the security code.
When the keypad is locked,
appears on top of the display.
Note that if you have activated the security keyguard, it does not
protect your phone data from PC Suite access.
protect your phone data from PC Suite access.
•
Cell info display
and select
On
to set the phone to indicate when it is
used in a cellular network that is based on Micro Cellular Network
(MCN) technology (network service).
(MCN) technology (network service).
•
Welcome note
and key in the note that you would like to be shown
briefly when the phone is switched on. To save the note, press
Save
.
•
Operator selection
and
Automatic
and the phone automatically
selects one of the cellular network operators available in your area.
If you select
Manual
, you can select a network operator that has a
roaming agreement with your home network operator. If
No network
access
is displayed, you must select another network operator. The
phone stays in manual mode until the automatic mode is selected or
another SIM card is inserted into the phone.
another SIM card is inserted into the phone.
•
Confirm SIM service actions
. See SIM services (Menu 10) on page
122.
rm-2_en1_FCC.fm Page 91 Monday, February 16, 2004 8:14 AM