AeroScout EX5200 사용자 설명서
EX5200 Exciter Deployment Guide
10
Exciter Connector Panel
The EX5200 Exciter has four connectors and two switches inside the back panel.
Figure 4: EX5200R Connector Wiring
(#1) Ethernet LAN Connection: RJ-45 connector. In a configuration with a
physical Ethernet cable connection to the LAN, the network cable is attached
physical Ethernet cable connection to the LAN, the network cable is attached
here.
Permanent connection to a wired network is not mandatory. However, you
must have a wired connection to configure the Exciter. Some monitoring
functions are not available if the Exciter is not connected to the network. This
connection is also used for Power over Ethernet (PoE, 802.3af).
functions are not available if the Exciter is not connected to the network. This
connection is also used for Power over Ethernet (PoE, 802.3af).
(#2) Power Jack: Accepts an input voltage of 24-48V DC. This is a standard 5.5
mm jack connector for direct power supply. The power adapter is not supplied
with the Exciter and can be purchased separately. When PoE is used, this
connector becomes redundant.
with the Exciter and can be purchased separately. When PoE is used, this
connector becomes redundant.