Schulte-Schlagbaum AG WG 사용자 설명서
Guide
SOT-WG
Schulte-Schlagbaum AG
Page 7 of 17
SOT_WG_6-713-2 14S 1_3.docx
The following guidelines must be observed for installation:
Prior to final installation the intended location of installation should be checked for suitability.
The physical distance to adjacent devices of the same type may not be less than 30 cm.
The device should not be installed on conductive materials such as metal surfaces, metal
The physical distance to adjacent devices of the same type may not be less than 30 cm.
The device should not be installed on conductive materials such as metal surfaces, metal
grids (reinforcement) or metallised surfaces as these surfaces could effect a reduced radio
range.
range.
EMC interference via supply leads or magnetic fields can disturb the wireless
communication.
Note:
Appropriate fastening material (screws, dowel pins and similar) must be provided on site.
Adapter plate for
latched mounting
latched mounting
The gateway can be plugged onto the supplied
adapter plate.
The gateway can then be latched into the adapter
plate by moving the housing.
adapter plate.
The gateway can then be latched into the adapter
plate by moving the housing.