Radwin Ltd. WINLINK 사용자 설명서
Package Contents
3-1
Chapter 3
Installation and Setup
Installation and Setup
This chapter describes installation and setup procedures for AirMux-104 system.
After installing the unit, refer to
After installing the unit, refer to
for configuration instructions.
for test and diagnostic
instructions.
Internal settings, adjustment, maintenance, and repairs may be performed
only by a skilled technician who is aware of the hazards involved.
Always observe standard safety precautions during installation, operation, and
maintenance of this product.
only by a skilled technician who is aware of the hazards involved.
Always observe standard safety precautions during installation, operation, and
maintenance of this product.
3.1 Site Requirements and Prerequisites
For the RTCB, allow at least 90 cm (36 in) of frontal clearance for operating and
maintenance accessibility. Allow at least 10 cm (4 in) clearance at the rear of the
unit for signal lines and interface cables.
The ambient operating temperature should be -45–60°C/-49–140°F (RT), or
-5–45°C/23–113°F (RTCB) at a relative humidity of up to 90%, non-condensing.
maintenance accessibility. Allow at least 10 cm (4 in) clearance at the rear of the
unit for signal lines and interface cables.
The ambient operating temperature should be -45–60°C/-49–140°F (RT), or
-5–45°C/23–113°F (RTCB) at a relative humidity of up to 90%, non-condensing.
3.2 Package Contents
The AirMux-104 package includes the following items:
• RT (radio terminal)
• RTCB (radio terminal connection box)
• RT cable
• AC/DC power converter
• AirMux-104 installation and operation manual
• RT mounting kit.
• RT (radio terminal)
• RTCB (radio terminal connection box)
• RT cable
• AC/DC power converter
• AirMux-104 installation and operation manual
• RT mounting kit.
Warning