CipherLab Co. Ltd. 9700 사용자 설명서

42

9700 Mobile Computer (CE) 

Reference Manual

Direct cradle charging makes use of a Charging & Communication Cradle (hereinafter 
“cradle”). The cradle is one of the accessories you can opt for. 

Prior to charging, install main battery as described in 

Install/Remove Main Battery

. Then 

follow the steps below: 

1) Seat the mobile computer into the cradle. Connect one end of the USB cable to the 

Cradle and the other end to the PC. 

2) To charge the mobile computer, connect the cradle to an external power source using 

the power adapter. 

3) Tap Start | Settings | Control Panel | USB Connection 

.

4) To connect to the PC via ActiveSync, chose ActiveSync Serial Mode or ActiveSync 

Serial Mode.

To treat the mobile computer as an external storage device, chose Mass Storage – SD 
Card. Note that Mass Storage is only supported when as SD card is installed on the 
mobile computer. 

5) Tap OK on the title bar to apply the settings.   

If ActiveSync Serial Mode is selected, see 

Syncing Tools

 and subsequent sections to 

know how to use ActiveSync. 

Note: The cradle supports USB Host Mode via a USB OTG cable.