CipherLab Co. Ltd. 9700 사용자 설명서
87
Chapter 3 Radios
Auth Server
Type of authentication server being used for EAP authentication.
Value:
Type 1
Cisco Secure ACS or another server that uses
PEAPv1 for PEAP with EAP-MSCHAPV2
(PEAP-MSCHAP)
PEAPv1 for PEAP with EAP-MSCHAPV2
(PEAP-MSCHAP)
Type 2
A different authentication server, such as
Juniper Networks Steel Belted RADIUS, that
uses PEAPv0 for PEAP-MSCHAP
Juniper Networks Steel Belted RADIUS, that
uses PEAPv0 for PEAP-MSCHAP
Default: Type 1
TTLS Inner Method
Authentication method used within secure tunnel created by EAP-TTLS.
Value:
Auto-EAP
Any available EAP method
MSCHAPV2
MSCHAP
PAP
CHAP
EAP-MSCHAPV2
Default: Auto-EAP
PMK Caching
The type of Pairwise Master Key (PMK) caching to use with a WPA2
encryption type (alternative to WPA2 CCKM).
encryption type (alternative to WPA2 CCKM).
Value: Standard or OPMK (opportunistic PMK)
Default: Standard
TX Diversity
How to handle antenna diversity when transmitting data to AP.
Value:
Main Only
Use main antenna only
Aux Only
Use auxiliary antenna only
On
Use diversity
Default: On
RX Diversity
How to handle antenna diversity when receiving data from AP.
Default: On-start on Main
This is a fixed setting; on startup, the main antenna is always used
Frag Thresh
When packet size exceeds the set threshold, it becomes fragmented.
Value: 256 ~ 2346
Default: 2346 (bytes)
RTS Thresh
When packet size exceeds the set threshold, RTS/CTS is required on link.
Value: 0 ~ 2347
Default: 2347 (bytes)
LED
Indicates whether or not an LED is used.
Value: On, Off
Default: Off
Tray Icon
Whether to enable the system tray icon or not.
Value: On, Off
Default: On