Xplore Technologies Corp of America LE1600T004BG 사용자 설명서

다운로드
페이지 94
58 Motion Computing LE1600 and LS800 Tablet PC User Guide
Helpful Hints: Dictating and Recording 
• You may want to start recording or dictating from the Wide Angle 
(Motion Dashboard setting) and change to a more-restricted angle 
(Narrow or Medium) if too many outside sounds are recorded. The 
advantage to the Wide Angle is that no sounds will be lost if you change 
your location. The disadvantage is that outside sounds may be picked 
up that interfere with the recording.
• You MUST recalibrate the microphones if you change from one orienta-
tion (landscape) to another (portrait). This is because the skew angle 
changes and the sound will no longer be in the angle of acceptance. If 
necessary, refer to the earlier information on skew angle.
• Even with the Narrow Angle setting, if a sound is loud enough and within 
the angle of acceptance (no matter how distant), the sound will be 
picked up by the microphones. The advantage of the Tablet PC is that it 
detects fewer extraneous sounds than other audio systems. You can fur-
ther limit the detection of these outside sounds by turning down the 
microphone volume and speaking louder; this reduces the microphones’ 
range and restricts their ability to detect extraneous sounds.
• The Tablet PC contains pre-installed audio components. If you install a 
third-party audio device (such as USB or Bluetooth devices), the Motion-
installed audio may not work. If this happens, you must reinstall the 
Motion-audio components. (The Motion audio components are the Sig-
maTel and Knowles Acoustics audio drivers.) After you install these, if 
you still have problems recording, contact Motion Technical Support or 
the Bluetooth or USB manufacturer’s technical support.
• To improve speech recognition, run additional speech training sessions. 
Open the Windows Control Panel and select Speech to perform addi-
tional speech training. As you do this, speech recognition accuracy will 
gradually improve.
P
ORTS
S
LOTS
 
AND
 
C
ONNECTORS
PC Cards (LE1600)
The PC Card Slot, also referred to as a PCMCIA Card Slot, holds one Type-
II PC Card for networking, memory expansion, or accessory connection.  
1. To install a PC Card, insert it label side up.
2. To remove a PC Card, push the button next to the slot until it 
pops out.
3. Push it again to eject the PC Card.
NOTE: Your Tablet PC ships with a plastic blank card in the 
PC Card slot. When the slot is not in use, we recommend that 
you leave the plastic blank in place.
SD Cards
The SD Card Slot holds one SD Card (SDIO compatible) for networking, 
memory expansion, or accessory connection. 
1. To install an SD Card, insert it in the slot, label side up.
2. To remove the SD Card, grip the edge of the card and carefully pull it 
from the slot. Notice that the edge of the Tablet PC is curved slightly