HS Teliann Inc. TP3200-D21 사용자 설명서

 

  107 

 

Problem: I cannot make a call after installation and reboot. 

1.  Check your Ethernet and PSTN connection to make sure that they are 

connected correctly – please refer to the earlier sections (Section 6) of 

this manual for the connection.    If these are correct, please go on to 

the following checks. 

If you are on an ADSL modem, and the LED on the ADSL modem does 

not light up, please check your ADSL modem guide from your ISP 

(Internet Service Provider) and if there are problems with the ADSL 

connection or you cannot see the phone number on the last line of the 

LCD display, please contact your ISP.  If these are not the problem, 

please press the menu button and select setup, network, PPPoE and 

check your ISP PPPoE ID and PPPoE Password and make sure that the 

information is correct and the correct case is used.  For example, 

UserNameOne should have the respective upper case alphabets for U, 

N and O and lower case for the rest of the alphabets.     

If you are on dialup low bandwidth connection.    Please press the menu 

button, select setup, modem, forward to edit profile and check your 

profile. Please check your ISP dialup number, ID and PWD and make 

sure that they are correctly setup under the modem setting in the menu 

function and the correct case is used.    Please note that for dialup, the 

modem is already internally built and do not connect this through