Chung Nam Electronics Co. Ltd. WLC123NR 사용자 설명서
button in wireless configuration utility to start to establish wireless
connection by WPS. Please be patient (This may require several seconds
to one minute to complete). When you see ‘WPS status is connected
successfully’ message, means the connection between your wireless
network card and access point is successfully connected by WPS, and the
information about access point you connected to will be displayed.
Sometime WPS may fail, and you can click ‘PBC’ button few more times
to try again. When an access point is connected, you can click
‘Disconnect’ to disconnect your wireless network card from a connected
access point, or select another WPS-enabled wireless access point, then
click ‘Connect’ to establish connection to selected access point, if there
are more than one WPS-enabled access point found. You can also click
‘Rotate’ button, and next access point on the list will be selected to
establish connection.
to try again. When an access point is connected, you can click
‘Disconnect’ to disconnect your wireless network card from a connected
access point, or select another WPS-enabled wireless access point, then
click ‘Connect’ to establish connection to selected access point, if there
are more than one WPS-enabled access point found. You can also click
‘Rotate’ button, and next access point on the list will be selected to
establish connection.