ZTE Corporation ZTEMF30 사용자 설명서
57
Port Range: Set port numbers for the virtual server.
Protocol: Set protocol for the virtual server.
Comment: Type comment for the virtual server settings.
Select Enable, and input the detail information in the Virtual Server Settings
area, and then click Apply to add a new rule. Click Delete Selected to delete
the rule which you selected. Click Reset to clear what you select or input.
3. System Security
You can configure system firewall to protect AP or router from being attacked.
Select Firewall→System Security, the system security setting is shown in the
following figure:
Allow or Deny the remote management function and Enable or Disable ping
from WAN filter on requirement, and then click Apply. Click Reset to restore
the default value.
4.2.8 Advanced
1. Status
Select Advanced→Status, the system information is shown in the following
figure: