ZTE Corporation ZTEMF612 사용자 설명서
19
from the network. After making changes reboot your router by turn off
and on again.
and on again.
4.2.1 Login
The router can be connected by RJ45 or by Wi-Fi (the SSID is “ZTE
Wireless Network”). By either connection mode, you should set to
obtain an IP address automatically in the attribution setting of Internet
protocol(TCP/IP).
After your computer gets the IP address (like 192.168.0.101) from the
router, open a web browser and type “ http://192.168.0.1” in the
address bar, and then input the username and password.
User name: admin
Password: admin
Wireless Network”). By either connection mode, you should set to
obtain an IP address automatically in the attribution setting of Internet
protocol(TCP/IP).
After your computer gets the IP address (like 192.168.0.101) from the
router, open a web browser and type “ http://192.168.0.1” in the
address bar, and then input the username and password.
User name: admin
Password: admin
Click Login to log in the router. Check Save to save the user name
and password.
and password.
When you successfully login, the Quick Setup procedure is shown in
the following figure:
the following figure: